Spoofer Usage Guide

Estimated time: 10 minutes + reboot

You must complete this process.

Please proceed with all steps below in order.

Pre-Setup Checklist

[ ] Windows Defender disabled
[ ] C++ runtime installed
[ ] Spoofer.exe, HwidChecker.exe ready
[ ] Able to run as administrator

Disk Spoof requirements by game

Apex: Disk Spoof required → Disk Spoof Setup Guide
Rust: Disk Spoof required → Disk Spoof Setup Guide
LoL: Disk Spoof required → Disk Spoof Setup Guide
VALORANT: Disk Spoof required → Disk Spoof Setup Guide

1. Record Hardware ID (Before Spoofing)2. Use the Spoofer3. Verify Changes (After Spoofing)4. Use EFI Spoofing (If Spoofing Failed)4-1. Register Secure Boot Keys (After EFI Spoofing)5. Post-Completion Checklist6. Troubleshooting Guide

Check current hardware ID with HWID Checker

Run HwidChecker

Right-click the HwidChecker.exe file
Click [Run as administrator]
When it runs, hardware information is collected automatically

Save Results

Wait until the "Press Enter to exit" message appears
Open Notepad (Win + R → type notepad and press Enter)
Press Ctrl + V in Notepad to paste
Save to your Desktop as "HWID_before.txt"

Items to verify

Make sure the following items are recorded: - GUID - MachineGuid - Volume Serial Number - MAC Address - CPU ID - BIOS Serial - Mainboard Serial

Run the Spoofer and register your license

Important - License timer starts when entered

Enter the license you received after purchase exactly.

Run the Spoofer

Right-click the Spoofer.exe file
Click [Run as administrator]

Register License

Enter the license key you received after purchase in the license input field
Click [Login] or [OK]

Start Spoofing

Make sure the spoofing method is set to Method 1 on the main screen
Click the [Start Spoofing] button
Wait until the progress reaches 100%

Reboot

Reboot required

After spoofing is complete, you must reboot for changes to take effect.

Confirm the spoofing complete message
Reboot manually

Verify changes with HWID Checker

Required verification step

This is the most important step to verify that spoofing worked properly.

Re-run HwidChecker

After reboot, run HwidChecker.exe as administrator
Wait for the "Press Enter to exit" message
Open Notepad → paste with Ctrl + V
Save to your Desktop as "HWID_after.txt"

Compare Results

Open both files and verify that the following items have all changed:

Item	Changed?
GUID	Check
MachineGuid	Check
Volume Serial Number	Check
MAC Address	Check
CPU ID	Check
BIOS Serial	Check
Mainboard Serial	Check

If all changed

Proceed to Step 5: Post-Completion Checklist.

If any item did not change

Proceed to Step 4: Use EFI Spoofing.

If you get a Secure Boot error after EFI spoofing

Additionally proceed to Step 4-1: Register Secure Boot Keys.

Change spoofing method and configure BIOS

What is EFI spoofing?

The EFI method changes hardware IDs at a deeper level. BIOS settings need to be changed.

Change Method in Spoofer

Run Spoofer.exe as administrator
Change the spoofing method (METHOD) to EFI
Click [Start Spoofing]
Reboot after completion

Set BIOS Boot Order

Important - Boot order configuration required

You must change BIOS settings after EFI spoofing.

Enter BIOS

Repeatedly press the boot key as soon as you power on the PC: - Asus: F2 or Del - GIGABYTE: Del - MSI: Del - ASRock: F2 or Del - Biostar: Del

Change Boot Order

Go to the Boot tab
Select Boot Option #1 or 1st Boot Priority
Set UEFI OS (or the spoofer-related entry) as #1 first priority
Set Windows Boot Manager as #2 second priority
Press F10 to save and reboot

Re-run Step 3

After reboot, run HwidChecker again to verify changes.

Resolve Secure Boot errors after EFI spoofing

Only proceed with this step after EFI spoofing

It is usually not needed if you only used regular spoofing (method 1). Proceed only if you get a "Secure Boot Violation" or "Invalid signature" error after rebooting with EFI spoofing.

Required Items

[ ] EFI spoofing already completed
[ ] EFI partition explorable in BIOS

Certificate location

When EFI spoofing is performed, a Tophel.der certificate file is automatically created in the EFI partition.

Enter BIOS

Repeatedly press the boot key as soon as you power on the PC: - Asus: F2 or Del - GIGABYTE: Del - MSI: Del - ASRock: F2 or Del - Biostar: Del

Register Secure Boot Keys

Caution

You must register the same Tophel.der file in both KEK and DB. Registering only one may cause Secure Boot errors to persist.

Go to the Settings, Security, or Boot tab
Enter the Secure Boot menu
Set Secure Boot to Enabled or Custom (may not exist)
Select Key Management or Secure Boot Keys
In the certificate browse path, select the EFI partition

Register KEK

Select the KEK (Key Exchange Key) item
Click Append or Add New Key
If a default key message appears, select no
Select the EFI partition from the storage device list
Select the Tophel.der file

Register DB

Select the DB (Authorized Signatures) item
Same as KEK

After registration

Press F10 to save
Reboot
Proceed to Step 3: Verify Changes again.

Pre-game launch checklist

Required check before launching games

Make sure all items are complete before launching the game.

HWID Change Verification

[ ] All hardware ID items changed
[ ] Post-spoof HWID and pre-spoof HWID are all different

Pre-Game Launch Checklist

[ ] Windows Defender disabled
[ ] Spoofer run and reboot completed
[ ] (Optional) Disk Spoof setup completed
[ ] (Optional) 1.1.1.1 DNS configured

Post-Game Launch Checklist

Launch the game
Log in with a new account (do not use the banned account)
Test play (1 hour or more recommended)
Check for error messages

If working normally

Game runs without errors
No ban message during play
Normal login on reconnection

If ban is not removed after spoofing

Solutions by cause

Try the solution that matches your situation.

Secure Boot Error (After EFI Spoofing)

Affected: If you see "Secure Boot Violation" or "Invalid signature" after EFI spoofing

Solution: 1. Enter BIOS during reboot (Del or F2) 2. Enter the Secure Boot Key Management menu 3. Select the EFI partition from the storage device list 4. Register the Tophel.der certificate in both KEK and DB 5. Press F10 to save and reboot 6. Verify changes again

See Step 4-1: Register Secure Boot Keys above for detailed instructions.

Disk Spoof Not Set Up

Affected: Apex, Rust, LoL, and VALORANT users who did not set up Disk Spoof

Solution: Proceed with the Disk Spoof Setup Guide

BIOS Settings Not Done

Affected: If TPM and Secure Boot were not disabled

Solution: Re-do the BIOS Settings Guide

Leftover Game Files

Affected: If the same game was previously installed on this PC

Solution: Games other than VALORANT, LoL, and Delta Force can be removed with Revo Uninstaller without a reset.

IP Not Changed

Affected: If an IP ban is included

Solution: 1. Use 1.1.1.1 DNS - Download 1.1.1.1 2. Change router MAC address - randomly change the MAC address in router settings 3. Use an IP-changing VPN (a VPN that actually changes your IP address)

Spoofer Run Error

Administrator privileges not granted

Symptom: "Administrator privileges required" message when running the spoofer

Solution: 1. Right-click Spoofer.exe 2. Click [Run as administrator]

Blocked by Windows Defender

Symptom: Spoofer closes immediately after launch

Solution: 1. Windows Security → Virus & threat protection 2. [Manage settings] → set all items to Off 3. Completely disable with Defender Controller

C++ Runtime Not Installed

Symptom: "MSVCP140.dll etc. not found" message

Solution: Install the C++ runtime package

Completion Checklist

[ ] Pre-spoof HWID recorded
[ ] Spoofer run and spoofing completed
[ ] Reboot completed
[ ] Post-spoof HWID changes verified (all items)
[ ] Pre-game launch checklist completed
[ ] Game launched and test play completed
[ ] Normal operation confirmed

Next step

Spoofer usage is complete. Now proceed to Verify Unban.

Next step: Check Unban Guide →